Chemical engineering topic list of research papers
-
THE EFFECT OF TEMPERATURE PYROLYSIS PROCESS OF USED TIRES ON THE QUALITY OF OUTPUT PRODUCTS2014 / Natália Jasminská, Tomáš Brestovič, Mária Čarnogurská
-
Investigation of Biomass Gasification Process with Torrefaction Using Equilibrium Model
Abstract The aim of the biomass gasification process is syngas production. It is a complicated chemical process during which fuel goes through pyrolysis, oxidation and reduction stages. Syngas composition and process behaviour depends on many...
2015 / Vladimirs Kirsanovs, Aivars Zandeckis -
Heat integration for bio-oil hydroprocessing coupled with aqueous phase steam reforming
Abstract Optimized heat exchanger networks can improve process profitability and minimize emissions. The aim of this study is to assess the heat integration opportunities for a hypothetical bio-oil hydroprocessing plant integrated with a steam...
2015 / Mobolaji B. Shemfe, Beatriz Fidalgo, Sai Gu -
Experimental Evaluation of Effect of Oxidative Degradation of Aqueous Monoethanolamine on Heat of CO2 Absorption, Vapor Liquid Equilibrium and CO2 Absorption Rate
Abstract Oxidative degradation produces carboxylic acids which are one of the undesirable degradation products and may have a negative impact on the CO2 separation energy of post combustion capture system. 30wt% MEA solutions mixed with carboxylic...
2014 / Takao Nakagaki, Ippei Tanaka, Yukio Furukawa, Hiroshi Sato, Yasuro Yamanaka -
Potentiometric Oxygen Sensor with Solid State Reference Electrode2014 / Katarzyna Dunst, Grzegorz Jasinski, Piotr Jasinski
-
Time Dependence of Bed Particle Layer Formation in Fluidized Quartz Bed Combustion of Wood-Derived Fuels2014 / Hanbing He, Dan Boström, Marcus Öhman
-
Synthesis of ammonia directly from wet air at intermediate temperature
Abstract For the first time, ammonia has been directly synthesised from wet air at intermediate temperature. Ce0.8Gd0.2O2−δ (CGO)–(Li,Na,K)2CO3 electrolyte together with a new perovskite oxide Pr0.6Ba0.4Fe0.8Cu0.2O3−δ ...
2014 / Rong Lan, Khaled A. Alkhazmi, Ibrahim A. Amar, Shanwen Tao -
Numerical Simulation of the Flow Field and Chemical Reactions within a NSC Diesel Catalyst
Abstract In the present work three-dimensional steady and unsteady numerical simulations of the flow field and chemical reactions within aNOx Storage Converter (NSC) diesel catalyst have been made. In the first part of the paper, only the flow...
2015 / Francesco Fornarelli, Sergio Camporeale, Ruggiero Dadduzio, Bernardo Fortunato, Marco Torresi -
Analysis of Public Transit Transfer Influence Factors Based on Mobile Terminal
Abstract Transfer influence factors can lay the foundation of transfer system planning and management which are important sections of public transit. A mobile terminal which provided a fast and efficient vector to collect transfer data was...
2016 / Lishan Sun, Siyuan Hao, Jing Qiao, Pengfei Zhao -
The Path Length Prediction of MANET Using Moving Average Model
Abstract Wireless networks are organized as a network with mobile nodes that act as hosts and routers to broadcast packets. The frequent changes of network topology, the path length between source and destination nodes also varies for changing of...
2014 / Arindrajit Pal, Jyoti Prakash Singh, Paramartha Dutta -
Green building practices: Optimisation of CCHP and biomass heating for maximum CO2 reduction in a mixed-use development
Abstract Current building regulations enforce building designers towards efficient system design and provision of alternative means of supplying energy. Different green building certification schemes are deployed worldwide to encourage creating a...
2013 / Esam Elsarrag, Yousef Alhorr -
Amine blends using concentrated piperazine
Abstract Blends using concentrated (25 35wt %) piperazine (PZ) were characterized as solvents for CO2 capture at typical coal flue gas conditions. The new blends are 6 m PZ/2 m hexamethylenediamine (HMDA), 6 m PZ/2 m diaminobutane (DAB), 6 m PZ/2 m...
2013 / Le Li, Alexander K. Voice, Han Li, Omkar Namjoshi, Thu Nguyen, et al. -
Inkjet printing of weakly elastic polymer solutions
Abstract Fluid assessment methods, requiring small volumes and avoiding the need for jetting, are particularly useful in the design of functional fluids for inkjet printing applications. With the increasing use of complex (rather than Newtonian)...
2014 / Stephen D. Hoath, Damien C. Vadillo, Oliver G. Harlen, Claire McIlroy, Neil F. Morrison, et al. -
Experimental investigation of heat transfer performance coefficient in tube bundle of shell and tube heat exchanger in two-phase flow2014 / Marcin Karaś, Daniel Zając, Roman Ulbrich
-
Optimization of Ethanol Production from NaOH-Pretreated Solid State Fermented Sweet Sorghum Bagasse2014 / Menghui Yu, Jihong Li, Sandra Chang, Ran Du, Shizhong Li, et al.
-
Determination of Methane and Carbon Dioxide Formation Rate Constants for Semi-Continuously Fed Anaerobic Digesters2015 / Jan Moestedt, Jonas Malmborg, Erik Nordell
-
Simultaneous removal of SO2 and NOx with ammonia combined with gas-phase oxidation of NO using ozone2014 / Shaopeng Guo, Lina Lv, Jia Zhang, Xin Chen, Ming Tong, et al.
-
Deposition and Wear of Deposits in Swirl Spray Driers: The Equilibrium Exchange Rate and the Wall-borne Residence Time
Abstract Wall deposits are omnipresent in many particle technology operations, such as spray drying and granulation processes. Their impact has been long recognized and is typically considered detrimental to the process performance. Counter-current...
2015 / Víctor Francia, Luis Martín, Andrew E. Bayly, Mark J.H. Simmons -
Fabrication and Characterization of Phthalocyanine-Based Organic Solar Cells2014 / Makoto Iwase, Atsushi Suzuki, Tsuyoshi Akiyama, Takeo Oku
-
Enhancement in the Glass Transition Temperature in Latent Thiol-Epoxy Click Cured Thermosets2015 / Dailyn Guzmán, Xavier Ramis, Xavier Fernández-Francos, Angels Serra